Products
Resistor Pastes
| Product | Purpose |
|---|---|
| 29xxx Series | Low-cost, for heaters on dielectric-coated stainless steel, with controlled TCR, fires at 850 °C |
| 33000 Series | For lightning and surge arrest protection applications, resistivity in range 50 mohm - 1 ohm/sq |
|
3100 Series |
Low-temperature firing, for substrates such as glass and PES |
| 3414 Series | For pressure sensors, strain gauges, etc., gauge factor = 14-19 |
| 3900-J Series | Cadmium-free resistors for use in thick-film hybrid microelectronic circuits and discrete components |
| NTC-2100 Series | For NTC thermistors, beta = 300 - 3,100 depending on resistivity |
| PTC-2600 Series | For PTC thermistors, TCR » 4,000 ppm/°C for resistivity £ 10 ohm/sq |
| PTC-2600-I Series | Similar to PTC-2600 Series, with higher viscosity, can be used as a heater element on alumina, dielectric, and PES |
| R-300-A/B series | For resistor networks and hybrid applications |
| R-300-P Series | Cadmium-free, for potentiometer applications, TCR = 50 ppm/°C in mid-range, CRV < -0.3% |
Green Products are Lead-Free, Cadmium-Free
The above ESL materials are representative of the most common market requirements. The front-side and back-side silvers are available in a number of versions, depending on factors such as the type of silicon (single crystal, poly- or multi-crystalline, etc.), the nature of the anti-reflective coating (silicon nitride, titanium dioxide, etc.) and the paste application method (screen printing, etc.)
The above ESL materials are representative of the most common market requirements. The front-side and back-side silvers are available in a number of versions, depending on factors such as the type of silicon (single crystal, poly- or multi-crystalline, etc.), the nature of the anti-reflective coating (silicon nitride, titanium dioxide, etc.) and the paste application method (screen printing, etc.)