| Medical |
| Green
Products are Lead-Free, Cadmium-Free |
Order
Trial Quantity |
| Product |
Purpose |
PDF |
 |
| 9912-G |
Silver
Conductor
Excellent solderability and leach resistance,
for use on alumina or beryllia |
 |
 |
9512
|
Silver-Platinum
Conductor
Excellent thermal cycle adhesion and solderability, low
cost, for general use
|
|
|
| 9512-G |
Silver-Platinum
Conductor
Excellent printability, for general use |
|
|
| 9633-G |
Silver-Palladium
Conductor
2/1, excellent leach and migration resistance |
|
|
| 9635-HG |
Silver-Palladium
Conductor
General purpose 6/1 for use on alumina and on dielectric, excellent solderability over ESL dielectrics |
|
|
| 9635-H |
Silver-Palladium
Conductor
6/1, excellent aged adhesion, Cd-free |
|
|
| 9647 |
Silver-Palladium
Conductor
3/1, excellent solderability and large
Al wire bondability |
|
|
| 9695 |
Silver-Palladium
Conductor
20/1, wide firing range 625 - 930 °C |
|
|
| 9562-F |
Silver-Palladium-Platinum
Conductor
Resistor termination, large diameter wire bondability,
low R, short firing cycle |
|
|
| 9562-G |
Silver-Palladium-Platinum
Conductor
Resistor termination, large diameter wire
bondability, low R |
|
|
| 8835-1A |
Gold
Conductor
Alloyed gold for both Au and Al wire bonding |
|
|
| 8835-1B |
Gold
Conductor
General purpose, high adhesion, excellent line definition
for Au wire bonding up to 33 µm |
|
|
| 8844-G |
Gold
Conductor
General purpose for use on alumina and 4920 dielectric, gives thin, smooth and dense films, excellent results with thermosonic gold wire bonding |
|
|
| 8844 |
Gold
Conductor
General purpose, Cd-free, fritless, 850 °C firing |
|
|
| 8846-G |
Gold
Conductor
General purpose, alloyed, for aluminum wire bonding use on alumina and 4920, gives thin, smooth and dense films, excellent results with thermosonic gold wire bonding |
|
|
| 8881-B |
Gold
Conductor
Etchable, fritless, 850 °C firing, thin printing (6 - 8 µm),
dense film for 25 µm Au wire bonding |
|
|
| 8884-G |
Gold
Conductor
Excellent wire bonding and conductivity,
fritless, 850 °C firing |
|
|
| 5542 |
Platinum
Conductor
Porous electrode material for use on partially
stabilized zirconia |
|
|
| 5544 |
Platinum
Conductor
For use on resistance thermometers and heaters, TCR>3,300 ppm/°C |
|
|
| 5545 |
Platinum
Conductor
Excellent conductivity, for use on heating elements, etc. |
|
|
| 5837-G |
Platinum-Gold Conductor
Solderable both on alumina and when printed and fired over 4917 dielectric, can also be used on beryllia |
|
|
| 5837 |
Platinum-Gold
Conductor
For use on alumina, solderable |
|
|
| 5837-A |
Platinum-Gold
Conductor
For use on multilayer dielectric, solderable |
|
|
| 9912-THP |
Silver
through hole
Through-hole applications in alumina substrates |
|
|
| 8835-VIA FILL |
Gold
Via Fill
For multilayers |
|
|
R-300-A/B series |
Resistor
Series
For resistors, two series, blendable in the resistivity
ranges 1 - 10 kohm/sq. and 10 k - 1 Mohm/sq. |
| 4905-C |
Multilayer
Dielectric
Filled glass-ceramic, for use with gold conductors |
|
|
| 4911 |
Multilayer
Dielectric
Multilayer dielectric, for high-frequency, low-loss applications, k = 4 |
|
|
| 4917 |
Multilayer
Dielectric
Multilayer dielectric, suitable for mixed metals, high BDV |
|
|
| 4920 |
Multilayer
Dielectric
Thin printing, suitable for mixed metals,
high BDV |
|
|
| 4612-B |
Overglaze
& Crossover Dielectric
Alkali-free, crystallizing, green color |
|
|
| G-481 |
Overglaze
Acid resistant, excellent silver migration protection,
green, 600 °C |
|
|
| G-482 |
Overglaze
Same as G-481, but black |
|
|
| 4771-P1 |
Overglaze
Resistor overglaze, fires 525 - 625 °C |
|
|
|
| See
also ESL Capacitor Dielectric
Pastes and ESL Tape
Systems |
The
above materials are selected from the full ESL range
of pastes and are representative of the most common
market requirements. See the ESL Product
pages for additional materials.
|
