| Heaters
on Steel and Other Substrates |
| Green
Products are Lead-Free, Cadmium-Free |
Order
Trial Quantity |
| Product |
Purpose |
PDF |
 |
| 5051 |
Platinum
Conductor
Screen-printable metallo-organic Pt, fires
at 850 °C to provide a 0.15 - 0.25 µm film on glazed
ceramic substrate |
 |
 |
| 5545 |
Platinum
Conductor
Fritted Pt for heating elements, retains adhesion in hydrogen
atmosphere up to 600 °C, firing temperature of 850 °C - 1,300 °C
on preferred substrate |
|
|
| 5545-LS |
Platinum
Conductor
Thin-printing version of 5545 |
|
|
9912-A
|
Silver
Conductor
For termination of 29XXX resistors over dielectric
on stainless steel, fires at 850 °C
|
|
|
| 9695 |
Silver-Palladium
Conductor
For termination of 29XXX resistors over dielectric
on stainless steel, fires at 850 °C |
|
|
| 9501-CH |
Silver-Platinum
Conductor
For termination of 29XXX resistors over dielectric on
stainless steel, fires at 850 °C |
|
|
| 4604-A |
Dielectric
For use with 4605 to insulate aluminum |
|
|
| 4605 |
Dielectric
For use with 4604-A to insulate aluminum |
|
|
| 4916 |
Dielectric
For insulation of 304-type austenitic stainless steel,
fires at 850 °C |
|
|
| 4924 |
Dielectric
Ba-free, for insulation of 430 and 444-type ferritic
stainless steel, fires at 850 °C |
|
|
| 4956 |
Dielectric
Dielectric designed to insulate ferritic steel, minimal bowing when used on 430 S17 grade stainless steel |
|
|
| 4986 |
Dielectric
Co-firing, for insulation of 430-type ferritic
stainless steel, fires 850 °C |
|
|
| 4987 |
Dielectric
For insulation of thin (<1 mm) 430-type
ferritic stainless steel, fires at 850 °C |
|
|
| 4702 |
Overglaze
For resistors printed on 4924 dielectric, excellent acid resistance, fires at 850 °C |
|
|
| 4771-P1 |
Overglaze
Firing at 520 to 620 °C, for use
over all dielectrics, excellent water resistance |
|
|
| 41030-T |
Dielectric
Tape
Insulator tape, for use on 430-type ferritic
stainless steel, nominal thickness 120 µm |
|
|
| 41030-T-200 |
Dielectric
Tape
Insulator tape, for use on 430-type ferritic
stainless steel, nominal thickness 200 µm |
|
|
29xxx
Series |
Low-cost, for heaters on dielectric-coated stainless steel,
with controlled TCR, fires at 850 °C |
|
PTC-2600-I Series |
Similar
to PTC-2600 Series, with higher viscosity, can be used
as a heater element on alumina, dielectric, and PES |
| 14401 |
Dielectric
Polymer-based, for the insulation of aluminum and other substrates, may also
be used as a protective coating, cures at 320 °C |
|
|
| 19101 |
Silver
Conductor
Polymer-based, for use on insulated aluminum and other substrates, cures at
320 °C |
|
|
| 19102-A |
Silver
Conductor
Polymer-based, for use on insulated aluminum and other substrates, solderable, cures at
320 °C |
|
|
| 15501 |
Resistor
Polymer-based, for use on insulated aluminum and other substrates, may be blended
with 19101, cures at 320 °C |
|
|
|
The
above materials are selected from the full ESL range
of pastes and ceramic tapes and are representative of
the most common market requirements. See the ESL Product
pages for additional materials.
|
